• Bed Size (Working Area) - 1500x3000mm / 2000x4000mm to any size on request.

• Floor Anchored Rigid Base Design.

• Light to Heavy duty cutting with 100% duty cycle.

• Precision motion.

• High speed Servo Motor driven.

• Water Bed.

• Touch screen CNC Controller with operating software.

• Omic and/or plate sensing with THC.

• Standard to advance nesting program.

• Low maintenance cost.

• Bed Size (Working Area): 1500x3000mm / 2000x4000mm - Made to any size.

• Free Standing Rigid Bed Design.

• Light to Heavy duty cutting with 100% duty cycle.

• Precision motion with Servo Motors as standard.

• Water Bed.

• Touch screen CNC Controller with operating software.

• Arc Voltage Torch Height Control with electronic plate sensing.

• Standard to advance nesting program.

• Low maintenance cost.

• Available in bed sizes from 1500mm to 6000mm and Tandem.
• Available in capacities from 40 ton to 600 ton.
• Full commissioning pack included for turnkey installation and demonstration, just add oil and electricity.
• FULL SPECIFICATION LISTED BELOW.

• Available in bed sizes from 1500mm to 6000mm.
• Available in capacities from 40 ton to 600 ton.
• Full commissioning pack included for turnkey installation and demonstration, just add oil and electricity.
• FULL SPECIFICATION LISTED BELOW.

• Available in bed sizes from 1500mm to 6000mm.
• Available in capacities from 40 ton to 600 ton.
• Full commissioning pack included for turnkey installation and demonstration, just add oil and electricity.
• FULL SPECIFICATION LISTED BELOW.

• Available in bed sizes from 2500mm to 6000mm.
• Available in capacities from 4mm to 16mm.
• Full commissioning pack included for turnkey installation and demonstration, just add oil and electricity.
• FULL SPECIFICATION LISTED BELOW.

• Control: Programmable Estun E21-S control with 40 programs and 25 steps per program.
• Cutting capacity from: 1300mm x 4mm mild steel capacity
• Motor: 5.5 kw brake motor
• Full commissioning pack included for turnkey installation, just add electricity.
• FULL SPECIFICATION LISTED BELOW

• Cutting capacity from: 1300mm x 4mm mild steel capacity
• Motor: 5.5 kw brake motor
• Full commissioning pack included for turnkey installation, just add electricity.
• FULL SPECIFICATION LISTED BELOW

• High quality build and components.
• Laser for punch positioning.
• Central lubrication.
• Cut to length back stop.
• FULL SPECIFICATION LISTED BELOW.

• High quality build and components.
• Laser for punch positioning.
• Central lubrication.
• Cut to length back stop.
• FULL SPECIFICATION LISTED BELOW.

• High quality build and components.
• Laser for punch positioning.
• Central lubrication.
• Cut to length back stop.
• FULL SPECIFICATION LISTED BELOW.

• High quality build and components.
• Laser for punch positioning.
• Central lubrication.
• Cut to length back stop.
• FULL SPECIFICATION LISTED BELOW.

Please request a quote below:

• Length: 1270mm.
• Bending Capacity: 2.5mm.
• Roll dia: 90mm.
• Roll speed (RPM): 6mm.
• Motor power: 1.1kW.
• Wire Grooves Dia: 4/7/10mm.
• Machine dimensions: 1850x700x1200mm.
• Weight: 490kg.
• FULL SPECIFICATION LISTED BELOW.

Please request a quote below: 

• Useful Length: 1270mm.
• Bending Capacity: 5mm.
• Roll Diameter: 140mm Ø.
• Motor Power: 2.2kW.
• Back Roll Motor: 0.75kW.
• Machine Dimensions: 2470 x 750 x 1000mm.
• Weight: 1350Kg.
• FULL SPECIFICATION LISTED BELOW.

Please request a quote below:

• Usefull Height: 2050mm.
• Bending Capacity: 2.5mm.
• Roll Diameter: 140mm Ø.
• Motor Power: 2.2kW.
• Back Roll Motor: 2.2kW.
• Machine Dimensions: 3700 x 750 x 1000mm.
• Weight: 1850Kg.
• FULL SPECIFICATION LISTED BELOW.

Please request a quote below:

• 4 Roll Hydraulic Plate Roll.
• Capacity @ 1300 Ø without pre-bending: 13 x 2550mm.
• Capacity @ 1300 Ø with prebending: 10 x 2550mm.
• Capacity @ 390 Ø without prebending: 10 x 2550mm.
• Capacity @ 390 Ø with prebending: 8 x 2550mm.
• Central rolls: 260mm Ø.
• Side rolls: 200 mm Ø.
• Motor: 7.5kW.
• Dimensions: 4500x1590x1600mm.
• Weight: 6740kg.

 More information on our New VersaRoll 4.5mm x 1300mm Motorised Slip Roll available for sale, is listed below:

• Supplied with conical bending feature.

• Max rolling Thickness: 4.5mm.

• Max Rolling Width: 1300mm.

• Diameter of Roller: 120mm.

• Min Rolling Diameter: 130mm.

• Motor Power: 2.2kW.

• Roller Speed (rpm):9.3 (50Hz) to 11.2 960Hz).

• 6 months guarantee.

More information on our New VersaRoll 2.5mm x 1300mm Motorised Slip Roll available for sale, is listed below:

• Max Thickness: 2.5mm

• Max Width: 1300mm

• Diameter of Roll: 90mm

• Motor Power: 1.5kW

• Machine weight: 470Kg

• Dimensions: 1800 x 640 x 1000mm

• 6 month guarantee

More information on our New VersaRoll 1.5mm x 1300mm Motorised Slip Roll available for sale, is listed below:

• Supplied with conical bending feature.

• Max Thickness: 1.5mm.

• Max Width: 1300mm.

• Diameter of Roll: 75mm.

• Motor Power: 0.75kW 3PH.

• 6 month guarantee.

The W11 series plate rolling machine is a mechanical 3-roller symmetrical system with motorised up down movement of top idler roll which moves up and down in the centre of the two lower driven rolls.

Specification
Maximum plate width: 2500 mm
Plate yield limit: 245 MPa
Rolling speed: 4.5 m/min
Upper roll diameter: 170 mm
Lower roll diameter: 160 mm
Center distance between two lower rollers: 250 mm
Main motor power: 5.5 KW
Auxiliary motor power: 2.2 KW

Various sizes available, please request a quote below.

• The Bochi group have been manufacturing quality lathes since 1965.

• Distance between centers (mm): 1000 | 1500 | 2000 | 3000

• Max swing Ø over bed (mm): 500 | 660 | 800

• Max swing Ø over saddle (mm): 300 | 400 | 540

• Max swing Ø in gap (mm): 710 | 830 | 1000

• Max Ø of spindle bore (mm): 82 | 105 | 130

• FULL SPECIFICATION LISTED BELOW:

More information on our New Bochi-Baoji Precision Center Lathe available for sale, is listed below:

• Model: CS6250B

• Distance Between Centers: 1500mm

• Swing over the Bed: 500mm

• Swing in the Gap: 710mm

• Spindle Bore: 82mm

• Complete with all standard accessories including QUICK CHANGE TOOL POST

More information on our New BOCHI Precision Heavy Duty Centre Lathe available for sale, is listed below:

• Model: CS6266C

• Distance Between Centres: 2000mm

• Swing over the Bed: 660mm

• Swing in the Gap: 870mm

• Spindle Bore: 105mm

• Complete with all accessories including QUICK CHANGE TOOL POST

Various Models Available (C0636D, CM6241, CO636A)

Please request a quote below (Specs vary based on model):

• FULL SPECIFICATION AVAILABLE ON QUOTE

Technical Specifications:
Size of Work table: 900 x 240 mm
T Slot: 16 mm x 3 pc x 60 mm
Max Weight: 60 Kg
X-Axis Travel: 530 mm
Y-Axis Travel: 280 mm
Z-Axis Travel: 400 mm
Distance Between Spindle Nose and Table: 50-450/50-550 mm
Distance Between Spindle center and Column: 297 mm
Spindle Taper: BT30
Steel - 20mm
Castings -25mm
Max Spindle Speed: 100-6000 r/min
Spindle Motor Power: 2.2 kW
Feed Motor Power: X, Y, Z Axis: 1/1/1.5
Rapid Feeding Speed: X, Y, Z Axis: 6 m/min
Feeding Speed: 0-2000 mm/min
Min Set Unit: 0,01 mm
Max Size of Tool: Ø 60 x 175 mm
Max Tool Weight: 3.5 Kg
Machine Weight: 1000 Kg
Dimensions: 1640 x 1205 x 1950 mm

Standard Accessories:
Coolant System
Working Lamp
Automatic Lubricating System
Siemens 808D CNC Control
Sheetmetal base
Pneumatic Tool Release Clamp
4 Positioning ATC
Servo Drive

Please request a quote below.

• Variable Speed Head
• Bed size: 254 x 1390mm
• Bed travel: 900mm
• Cross travel: 500mm
• Knee travel: 700mm
• Table load: 500kg
• 2 x Powerfeeds
• Rapid up-down
• Spindle taper: ISO40
• Spindle travel: 127mm
• Spindle speed: 80~3600rpm
• Spindle motor: 5HP
• FULL SPECIFICATION LISTED BELOW.

Please request a quote below.

• Variable Head
• Bed size: 254 x 1270mm
• Bed travel: 762mm
• Cross travel: 350mm
• Knee travel: 405mm
• 2 x Powerfeed
• Spindle taper: R8
• Spindle travel: 127mm
• Spindle speed: 70~4200rpm
• Spindle motor: 3HP
• FULL SPECIFICATION LISTED BELOW.

Please request a quote below.

• Vertical Spindle: R8
• Horizontal Spindle: R8
• Vertical spindle to column distance: 250-650mm
• Vertical spindle to table distance: 250-650mm
• Horizontal spindle to table distance: 70-370mm
• Vertical spindle travel: 120mm
• Table size: 1000 x 240mm
• Table travel: 600 x 230mm
• Motor size: 1.5kW
• FULL SPECIFICATION LISTED BELOW.

More information on our Used Contour MDV 4-5 Turret Milling Machine available for sale, is listed below:

Variable Head, ISO40, Bed 1270 x 254, DRO, 2 x pf

• Spindle: ISO40

• Bed: 1270 x 254mm

• Variable speed head

• 2-axis DRO

• Air drawbar

• X & Y Powerfeeds

• Z Rapid feed

• Manufactured date: 2005
  

More information on our New Sahinler HPK100 Hydraulic Section Bender available for sale, is listed below:

Specifications:

• Distance between centers: 1000mm

• Max swing Ø over bed: 320mm

• Max swing Ø over saddle: 150mm

• Spindle taper: MT5

• Max Ø of spindle bore: 38mm

• Spindle speed range: 100-2500rpm

• Travel of crosslide: 160mm

• Feed motor torque (X/Z): 6NM/12NM

• X rapid traverse: 5m/min

• Z rapid traverse: 10/min

• Electric toolpost: 4 station

• Taper of tailstock: MT3

• Barel travel of tailstock: 160mm

• Power of main motor: 2.2kW

• Dimensions: 2300 x 1100 x 1650 (LxWxH)

• Weight: 950kg

Standard Accessories:

• 160mm 3 -Jaw Chuck and Tool Post Wrench

• Electrical Toolpost (4 Station)

• Cooling System

• Automatic Lubricating system

• Working Lamp

• Siemens 808D CNC Control

• Induction Hardened Bed-Way

• Sheetmetal base

Optional Accessories:

• 6 -Station Electric Toolpost

• Pneumatic Chuck

• Hydraulic Chuck

More information on our  New VersaDrill Pedestal Drill T25C 25mm available for sale, is listed below:

• Drilling Machine T-25C with Coolant Pump
• Recommended drilling capacity in mild steel is 25mm
• Spindle Travel 125mm
• 3 morse taper
• Manual feeds
• Geared head
• 8 speeds
• 6 month guarantee

More information on our New VersaDrill Pedestal Drill T-40 40mm   available for sale, is listed below:

• Drilling Machine T-40 with Coolant Pump
• 4 morse taper: provides for drilling up to 40mm diameter
• Auto feeds
• 8 speeds
• Stroke: 190mm
• Tapping Capacity: M22
• 6 month guarantee 

More information on our 32mm x 1000mm new radial drilling machine available for sale, is listed below:

• Spindle travel: 250mm
• Distance from spindle axis to column surface: 200 - 1000mm
• Max. distance from spindle nose to worktable: 664mm
• Max. distance from spindle node to base: 1065mm
• Morse taper 4
• Spindle speeds range: 71 - 1800rpm
• Spindle speeds: 8 steps
• Worktable size: 450 x 400 x 400mm

More information on our 40mm x 1300mm New Radial Arm drilling machine available for sale, is listed below:

• Spindle travel: 275mm
• Distance from spindle axis to column surface: 200 - 1300mm
• Max. distance from spindle nose to worktable: 900mm
• Max. distance from spindle node to base: 1250mm
• Morse taper 4
• Spindle speeds range: 54 - 1360rpm
• Spindle speeds: 8 steps
• Worktable size: 600 x 400 x 350mm

More information on our 50mm x 1600mm new radial drilling machine available for sale, is listed below:

• Spindle travel: 315mm
• Distance from spindle axis to column surface: 350 - 1600mm
• Max. distance from spindle nose to worktable: 720mm
• Max. distance from spindle node to base: 1220mm
• Morse taper 5
• Spindle speeds range: 25 - 2000rpm
• Spindle speeds: 16 steps
• Worktable size: 630 x 500 x 500mm

• +45° Square Cutting Capacity : 410mm
• +45° Flat Cutting Capacity : 410mm x 560mm
• +45° Round Cutting Capacity : 410mm
• 0° Square Cutting Capacity : 560mm
• 0° Flat Cutting Capacity : 750mm x 560mm
• 0° Round Cutting Capacity : 560mm
• FULL SPECIFICATION LISTED BELOW.

Beka-Mak linear way horizontal bandsaws have been designed to give a low cost compact and rugged machines. The bow is constructed of heavy gauge steel and mounted to chromed pillars which offers a strong rigid frame, providing a high degree of accuracy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. Thermal overload and no-volt release are standard feature and the machine automatically switches off at the end of the cut, the saw frame is lifted hydraulically up to the adjusted level.

• +45° Square Cutting Capacity: 380mm

• +45° Flat Cutting Capacity: 380 x 460mm

• +45° Round Cutting Capacity: 380mm

• Square Cutting Capacity: 460mm

• Flat Cutting Capacity: 650 x 460mm

• Round Cutting Capacity: 460mm

Standard Features
1,2m Material Roller Table
Control Panel
Hydraulic Vice
Hydro mechanic Blade Tension
Inverter
linear Guides
Material Limit Shaft
Optical Height Adjustment
Pressure Adjustment
Proximity switch for sensing blade slippage
SAP Coolant Pump
Saw Blade 41
Saw Blade Brush
Security Switch
Sensitive Pressure
Synchronisation Moveable  Arm/Vice


Optional Features
High Vice
Second Vice
Multiple Segments
Hydraulic Top Clamping
3 Mt Motorized Roller Table
Laser Line Pointer
Chip Conveyor
3 Mt Material Roller Table
ILC Micro spray Device
Hydraulic Blade Tension
2° inclined Blade
Turn Table
Split Vice

Please request a quote below.

• Square Cutting Capacity: 300mm.
• Flat Cutting Capacity: 320 x 300mm.
• Round Cutting Capacity: 320mm.
• FULL SPECIFICATION LISTED BELOW.

Please request a quote below.

• +45° Square Cutting Capacity: 260mm.
• +45° Flat Cutting Capacity: 280 x 200mm.
• +45° Round Cutting Capacity: 280mm.
• Square Cutting Capacity: 320mm.
• Flat Cutting Capacity: 440 x 220mm.
• Round Cutting Capacity: 320mm.
• FULL SPECIFICATION LISTED BELOW.

• +45° Square Cutting Capacity: 350mm
• +45° Flat Cutting Capacity: 460 x 180mm
• +45° Round Cutting Capacity: 350mm
• Square Cutting Capacity: 350mm
• Flat Cutting Capacity: 570 x 260mm
• Round Cutting Capacity: 350mm
• FULL SPECIFICATION LISTED BELOW.

More information on our New Beka-Mak BMSO-330CH NC Horizontal Band Saw available for sale, is listed below:

• The BMSO-330 CH NC is a fully automatic machine with a double column design

• catering for your mid -section areas (round up to 320 mm , flat 350 x 320 mm)

• ideally suited for cutting solid material (steel), as well as pipes, profiles and beams.

• Precision carbide blade guides

• robust, rigid construction of the machine ensure a precise cutting.

• The basic configuration of this machine includes a full stroke clamping cylinder and adjustable belt speed.
  

  
  Technical Details:

• 0° Round Cutting Capacity 330mm

• 0° Flat Cutting Capacity 360 x 330mm

• 0° Square Cutting Capacity 330mm

• Main Drive Motor 3kW

• Hydraulic Pump 1,5kW

• Coolant Pump 0,12kW

• Cutting Speeds 20 - 100m/min

• Multiple Stroke 9999mm

• Blade Size 4380x34x1,1mm

• Working Height 850mm

• Weight 2120kg

• Length 2100mm

• Width 2500mm

• Height 1560mm
  

  Standard Features:

• Friendly Use PLC Control Panel

• Hydra mechanical Blade Tension

• Chip Brush

• Linear Way

• Height Adjustment Switch

• Planetary Gearbox

• Inverter

• Sensitive Pressure

• Idle Wheel Motion Detector for Blade Stalling

• Hydraulic Split Vice

• Chip Conveyor

  Optional Features:

• Hydraulic Blade Tension

• Hexagonal Vices

• Micro spray Coolant

• 3 Mt Roller Table

• Hydraulic Top Clamping

• 4 kW Motor

Semi-automatic double miter for cutting profiles, solid steel and non-ferrous material
Robust constructed monoblock saw frame
Hydraulic clamping of horizontal vise (not BMSY 230 DG)
Automatic saw frame raising on cut end
Continuously adjustable belt speed 34-68 m / min BMSY 270 DGH / 20-100 m / min BMSY DGH 360 /440 DGH
Sensitive cutting pressure regulation function
Hydraulic-mechanical belt tension
Tape guide with hard metal pads sheets and rolls
Thermal overload protection
Automatic shut-off after cut end
Automatic belt break protection

• +60° Square Cutting Capacity: 100mm.

• +60° Flat Cutting Capacity: 150 x 100mm.

• +60° Round Cutting Capacity: 150mm.

• +45° Square Cutting Capacity: 170mm.

• +45° Flat Cutting Capacity: 270 x 200mm.

• +45° Round Cutting Capacity: 240mm.

• -45° Square Cutting Capacity: 180mm.

• -45° Flat Cutting Capacity: 270 x 210mm.

• -45 Round Cutting Capacity: 210mm.

• Square Cutting Capacity: 270mm.

• Flat Cutting Capacity: 350 x 220mm.

• Round Cutting Capacity: 270mm.

More information on our New Beka-Mak BMSY-230DG Horizontal Bandsaw available for sale, is listed below:

• Semi-automatic double miter for cutting profiles, solid steel and non-ferrous material
• Robust constructed monoblock saw frame
• Manually swiveling saw frame with hydraulic clamping for optimal miter 
• Miter on mobile control panel 
• Automatic saw frame raising on cut end
• Sensitive cutting pressure regulation function
• Hydraulic-mechanical belt tension
• Tape guide with hard metal pads sheets and rolls
• Thermal overload protection
• Automatic shut-off after cut end
• Automatic belt break protection 
• Chip brush on impeller 

Technical Details:

• Height 1300mm
• Width700mm
• Length 1350vmm
• Weight 430kg
• Working Height 760mm
• Band Dimensions 2720x27x0,9mm
• Cutting Speeds 35 - 70m/min.
• Coolant Pump 0,12kW
• Hydraulic Motor 0,37kW
• Main Drive Motor 1,0 - 1,3kW
• +60° Square Cutting Capacity 100mm
• +60° Flat Cutting Capacity 120 x 100mm
• +60° Round Cutting Capacity 120mm
• +45° Square Cutting Capacity 180mm
• +45° Flat Cutting Capacity 230 x 160mm
• +45° Round Cutting Capacity 210mm
• -45° Square Cutting Capacity 150mm
• -45° Flat Cutting Capacity 230 x 100mm
• -45 Round Cutting Capacity 180mm
• 0° Square Cutting Capacity 230mm
• 0° Flat Cutting Capacity 320 x 130mm
• 0° Round Cutting Capacity 230mm

Optional Features:

• 3 Mt Material Roller Table
• Inverter
• Micro spray Device

Standard Features:
Saw Blade 27
Height Adjustment switch
Hydromechanical Blade Tension
SAP Coolant Pump
Blade Brash
Material Limit Shaft
Security Switch
Control Panel
Vice

Product Description
With the movement of the bow enables cutting between 90° and +30°. The auto height adjustment sensor allows the blade to approach the material at a fast speed and hydraulic cutting control allows the bow to just clear over the material after each cut. This process is controlled by a digital counter on the control panel and optimizes the cutting time. Adjusting the bow at any angle is controlled by the hydraulic brake system or digital counter placed on the body of the machine.

Technical Details:

• 0° Round Cutting Capacity 450mm

• 0° Flat Cutting Capacity 695 x 425mm

• 0° Square Cutting Capacit y425mm

• +30° Round Cutting Capacity 450mm

• +30° Flat Cutting Capacity 560 x 425mm

• +30° Square Cutting Capacity 425mm

• +45° Round Cutting Capacity 430mm

• +45° Flat Cutting Capacity 430x 425mm

• +45° Square Cutting Capacity 425mm

• +60° Round Cutting Capacity 320mm

• +60° Flat Cutting Capacity 260 x 425mm

• +60° Square Cutting Capacity 290mm

• Main Drive Motor 4kW

• Hydraulic Motor 0,55kW

• Coolant Pump 0,12kW

• Chip Conveyor 0.25kW

• Cutting Speeds 20 - 100m/min.

• Band Dimensions5400x41x1,3mm

• Working Height 690mm

• Weight 1630kg

• Length 2850mm

• Width 1300mm

• Height 1800mm

Standard Features
Planetary Gearbox
Linear Way
Hydromechanical Blade Tension
Synchronization Moveable Arm/Vice
Chip Brush
Digital Angle Display
Inverter
Control Panel
Sensitive Pressure
Hydraulic Angle Fixing
SAP Coolant Pump
Security Switch
Optical Quick Approaching
3° Inclined Bow
Hydraulic Vice
Synchronization Moveable Arm/Vice


Optional Features
Micro spray Coolant
Hydraulic Blade Tension
Laser Pointer
3 Mt Motorized Roller Table
3 Mt Roller Table
Chip Conveyor
Hydraulic Top Clamping

• +45° Square Cutting Capacity: 120mm
• +45° Flat Cutting Capacity: 110 x 110mm
• +45° Round Cutting Capacity: 110mm
• Square Cutting Capacity: 145mm
• Flat Cutting Capacity: 200 x 120mm
• Round Cutting Capacity: 170mm
• FULL SPECIFICATION LISTED BELOW.

Cutting capacity at 90 degrees:

• Round bar: 180mm
• Rectangle: 180mm x 280mm
• Rectangle: 65mm x 300mm

Cutting capacity at 45 degrees:

• Round bar: 110mm
• Rectangle: 180mm x 110mm

More information on our New BMT-250A Horizontal Bandsaw available for sale, is listed below:

• Capacity @ 90 deg: Ø 250mm, 250x415mm / 200x450mm

• Capacity @ 45 deg: 190x250mm

• Blade Speed: 68-110-142-196FPM

• Blade size: 27 x 0.9 x 3300mm

• Motor size: 2HP

• Dimensions: 1730 x 700 x 1070 (LxWxH)

• Weight: 320kg

Cutting capacity at 90 degrees:

• Round bar: 254mm
• Rectangle: 127mm x 457mm

Cutting capacity at 45 degrees:

• Round bar: 150mm
• Rectangle: 150mm x 190mm
• FULL SPECIFICATION LISTED BELOW.

Cutting capacity at 90 degrees:

• Round bar: 254mm
• Rectangle: 160mm x 406mm

Cutting capacity at 45 degrees:

• Round bar: 170mm
• Rectangle: 160mm x 190mm
• FULL SPECIFICATION LISTED BELOW.

Meet the newest member of our best-selling line of Powermax® plasma systems. The Powermax45® XP delivers increased cut capacity, faster cutting speeds and automatic gas adjustment for quick, simple setup and operation.

The Powermax65® plasma system is a versatile machine for heavy-duty cutting and gouging in demanding environments. Designed to maximize uptime and productivity, the system offers the latest technological innovations, such as Smart Sense™ technology to automatically adjust the gas pressure.

The Powermax85® has the same features and options as the Powermax65®, but with more power from an output current of 85 amps. Designed to maximize uptime and productivity, the system offers the latest technological innovations, such as Smart Sense™ technology to automatically adjust the gas pressure.

The Powermax105® plasma system has the duty cycle and performance needed for tough industrial cutting and gouging jobs. Delivering superior cut capabilities thick metals, it also offers the latest technological innovations, such as Smart Sense™ technology to automatically adjust the gas pressure.

Delivering maximum power and performance for air plasma, the Powermax125® plasma system cuts thick metals fast. Able to make short work of the toughest cutting and gouging jobs, the system offers a 100% duty cycle, a 25 mm mechanized pierce capability, and fast gouging metal removal.

The MAXPRO200® LongLife® plasma cutting system is engineered for heavy-duty, high capacity automated and handheld cutting and gouging applications. The easy-to-use system operates with either air, oxygen, or nitrogen plasma gas, and combines fast cutting speeds and quick process changes to maximize productivity.

The HyPerformance® HPR400XD plasma system has been designed and built for maximum performance and productivity in x-y, bevel and robotic cutting operations. The versatile 400-amp rated system combines fast cutting speeds, rapid process cycling, quick changeovers and high reliability, and delivers the ultimate in HyPerformance mild steel cutting, plus aluminum capability and unmatched stainless steel cut quality.

The HyPerformance HPR800XD plasma system has been designed and built for maximum performance and productivity in x-y, bevel and robotic cutting operations. The versatile 800-amp rated system combines fast cutting speeds, rapid process cycling, quick changeovers and high reliability, and offers unmatched process flexibility to cut, bevel and mark metals up to 160mm.

The new XPR170™ is the latest system in the XPR™ plasma product line. Delivering next generation X-Definition™ processes from very thin up to mid-range thicknesses, the XPR170™ expands plasma capabilities and opportunities in ways never before possible.

The new XPR300™ represents the most significant advance in mechanized plasma cutting technology, ever. This next generation system redefines what plasma can do by expanding its capabilities and opportunities in ways never before possible. With unmatched X-Definition™ cut quality on mild steel, stainless steel and aluminum, the new XPR300 increases cut speed, dramatically improves productivity and slashes operating costs.

More information on our new Box & Pan Folder available for sale, is listed below:

• Capacity: 2540mm x 2,5mm

• Brand New